Real repairs · Glenorchy workshop

Honda CR-V Check Engine Light: The Broken Intake Hose We Found

This Honda CR-V came into our Glenorchy workshop with the check engine light on, and the problem was hiding somewhere most people never look.

Honda CR-V in for a check engine light diagnosis at Tassie Automotive, Glenorchy

Watch the 30-second repair

What the owner noticed

The check engine light was glowing on the dash, and the engine was running rough. Both together are a clear sign that something's wrong, and that it's worth getting checked before it gets worse.

How we diagnosed it

We hooked up the scanner and ran a full diagnosis. A scan tells us which system the engine computer is unhappy with, but the code alone doesn't tell you which part to replace. So we followed it up with a hands-on inspection of the engine bay.

What we found: a broken intake hose

The culprit was a broken hose between the air intake and the throttle body. It's an easy part to miss because it sits out of sight, and a crack can be hard to spot until the hose is flexed.

Broken intake hose found between the air intake and throttle body on a Honda CR-V

Why a cracked intake hose turns the light on

Your engine measures the air coming in so it can add exactly the right amount of fuel. A crack after that measuring point lets unmetered air sneak straight in. The engine ends up with more air than it thinks it has, so the mixture runs lean. That can cause a rough idle, hesitation and poor running, and the engine computer switches the check engine light on.

The fix

We fitted a brand-new hose and sealed it properly. Then we cleared the codes and started the engine. The light stayed off and the CR-V was running perfectly again.

Is it safe to drive with the check engine light on?

  • Light on steady, car driving normally: it's usually OK to drive gently to a workshop, but book it in soon. Small faults like this one can affect fuel use and running and get worse over time.
  • Light flashing, or the car is shaking, losing power or overheating: pull over safely and call us. A flashing light usually means a misfire that can damage the catalytic converter.

Got a warning light? Don't ignore it.

We do full computer diagnostics at our Glenorchy workshop: engine, ABS, airbag and transmission scans with a plain-English report. See Car Diagnostics or read more about why your check engine light comes on.

Check engine light questions

Why is my Honda CR-V check engine light on?

It can be anything from a loose fuel cap to a sensor fault, a misfire or an air leak. On this CR-V it was a broken intake hose letting unmetered air into the engine. A diagnostic scan plus an inspection is the only way to know for sure.

Can a cracked intake hose cause a check engine light?

Yes. A crack between the air flow sensor and the throttle body lets in air the engine can't measure, so the fuel mixture runs lean. That can cause rough running and switch the check engine light on.

How much does a diagnostic scan cost in Hobart?

At Tassie Automotive in Glenorchy, full computer diagnostics are $140, with a plain-English report. Any repair is quoted before we start.

Will the check engine light go off by itself after the fix?

Some faults clear after a few drives once they're fixed. We clear the codes after the repair and check the light stays off.

Where to find us

46 Grove Rd, Glenorchy TAS 7010

Open Mon–Fri 8am–5pm, Sat 9am–5pm, Sun 10am–5pm. Call (03) 6288 7861.

Book nowCall now

Get the Tassie Automotive app

Install it on your phone — book services in one tap.