Car problems · Hobart & Glenorchy

Brakes squeaking or grinding?

Brake noise is one of the few car problems that tells you plainly how urgent it is. A light squeak first thing in the morning is often nothing. A squeal every time you brake is a warning. A grinding or scraping sound is the last stage before real damage.

Squeal: book in this week. Grinding: stop driving.
Not sure? Call us before you drive it.

What are the likely causes?

Pad wear indicators

Many pads have a small metal tab that touches the rotor when the pad is nearly worn out. The high-pitched squeal is deliberate.

Pads worn to the backing plate

Once the friction material is gone, steel grinds on the rotor. Braking distances grow and the rotor is scored within kilometres.

Glazed pads or rotors

Heat from heavy braking on long descents can harden the surfaces, causing squeal and a pedal that needs more effort.

Surface rust or moisture

After rain or a night parked outside, a light scrape for the first few stops is normal and clears by itself.

A sticking caliper or a trapped stone

A caliper that doesn't release drags one pad constantly; a small stone caught behind the rotor makes a loud continuous scrape.

Is it safe to keep driving?

If the noise disappears after the first few stops of the day, it is probably surface rust and safe. A squeal that happens on every stop means the pads are low: you can drive carefully, but book in this week. If you hear grinding, feel vibration through the pedal, the car pulls to one side under brakes, or the pedal feels soft or sinks, do not keep driving. Call us and we'll advise the safest way to get the car to the workshop.

What do we check?

We take the wheels off and measure pad thickness on all four corners, check the rotors for scoring, heat marks and minimum thickness, make sure each caliper slides and releases freely, look over the brake hoses and lines, check the fluid's condition and test the handbrake. Then we show you what we found.

Prevention & what to tell us

You can make pads and rotors last longer by using a lower gear on long descents instead of holding the brake pedal down, leaving a bigger gap in traffic so you brake more gently, and having the pad thickness measured at every service so replacement can be planned. Pads are far cheaper than rotors, so acting at the squeal stage almost always saves money. When you book, tell us which wheel the noise seems to come from and whether it happens when braking, turning or all the time.

Which of our services fixes it?

Our Brake Service covers pad and rotor replacement, fluid flush, caliper service and a full brake inspection at $120 labour plus parts. The final price depends on the specific parts your vehicle needs and is confirmed before we start. If the fluid is old, a Brake Fluid Flush & Bleed is $150 as an add-on to any service tier and is included in the Full Major Service.

Where to find us

46 Grove Rd, Glenorchy TAS 7010

About ten minutes north of Hobart via the Brooker Highway, with free parking on site. We see drivers from Glenorchy, the northern suburbs and greater Hobart, and every repair is quoted before work starts.

Getting here from Hobart

Get it looked at properly

Tassie Automotive, 46 Grove Rd, Glenorchy TAS 7010. Open Mon–Fri 8am–5pm, Sat 9am–5pm, Sun 10am–5pm.

Book nowCall now

Get the Tassie Automotive app

Install it on your phone — book services in one tap.